Boat Stuff Parting out a 2017 AR240

[Ronnie]

Thanks it’s 34758

Shipping the captains chair to you will cost about $100 plus the cost of the box around another $20. I want $350 for the chair, mount and pedestal which is about 1/3 the new cost from yamaha. Making the total shipped just under $500. See the attached pics. This is sear 1 without a bolster.

if you want it let me know and I will send you payment information. I will ship within a week of payment.

I have not measured or weighed the stern ladder yet but will soon.

 

[Ronnie]

Interested in GloveBox .. shipping to 07410 PLS PM

Shipping will be about $32, plus around $18 for the box. I want $400 for the part, so less than 1/2 what yamaha charges for a new one, if they have it in stock. The total being $450. Let me know if you want it and I will send you payment information. I will ship within a week of being paid.

 

[Ronnie]

I plan to price out the deck latches and stern ladder shortly but I have a lot of other parts for sale. For instance, a deluxe mooring cover, ecms, transducer, pop up cleats, almost all or the seat cushions, pop up cleats, compartment doors/hatches, cup holders, etc.

let me me know what you are interested in and the shipping zip code.

 

[adrianp89]

How much for transducer shipped to 33781?

 

[Ronnie]

How much for transducer shipped to 33781?

I took a guess at the dimensions, weight and box cost, so came up with about $10 for shipping plus $3 for a box, add in another $237 for the transducer (less than 1/2 the new cost) for a total of $250.

 

[Marvin willis]

Connex?

 

[Ronnie]

@Marvin willis , the connext display sells for $2,200 new I’m asking $1,000 plus shipping.

it would ship from Discovery Bay in Northern California, 94505. Will get an actual shipping and packaging / box cost if you give me your zip code but based on somethings that I shipped earlier I estimate shipping will be around $30 all in.

I have pics of it installed and on as well as after it was removed from the boat.let me know if you want to aee them.

note this is an as is sale, that’s how I bought it so that’s how I’m selling it. I attest that it turned on consistently when I powered up the motors it was tied to and I could cycle through the display screens. I didn’t see any dead pixels but I was not able to use the unit on the water or for any long period of time because the boat it was installed in is not seaworthy.

if the above terms are not acceptable to you i understand. I would not buy this unless I really needed it and I could not get it anywhere else new and/or with a right to return it for a refund if it’s DOA.

if you are still interested, send me your/the mail to zip code.

fyi if I cannot sell it under the terms above I plan to just hold on to it in case my guages go out, in which case I would install this and the related guages and control wheel in its place.

 

[Riveramx]

Here are additional pics of parts I’m selling or will be selling soon. like all of the cushions except two filler cushions from the 2017 ar 240 (including the copilots captains chair not pictured), the speedos, connext display, control wheel, battery switching and charging system and misc hardware. like the clean out plugs, ladders, anchor laddder hatch, cleats, grab rails, the wake tower. Polk stereo (just the box not the control / display). The trailer is also for sale.

I will also be selling the intermediate bearings, a complete engine with wiring harness, both ecms / electrical boxes as well as the captains chair from my 2010 242 LS.
View attachment 193616View attachment 193617View attachment 193618View attachment 193619View attachment 193620View attachment 193621View attachment 193622View attachment 193623View attachment 193624View attachment 193625View attachment 193626View attachment 193627View attachment 193628View attachment 193629View attachment 193630View attachment 193631

let me know if you are interested in any of thesw parts.

interested in the inspection hatch cover i partially see in this at the bottom of this picture.

 

[Ronnie]

interested in the inspection hatch cover i partially see in this at the bottom of this picture.

That that thing sells new for $110, F’ing ridiculous. $25 including shipping but it it may be a while (a month or so) before I ship it (with parts for other buyers).

 

[Ronnie]

@Ronnie NEvermind my other post in the build/teardown thread. I'm dumb and finally found this one.

What's your price on these two items circled in red ?!?!

Best I can tell they are #19 from the diagram found here

View attachment 194276

Broke mine last fall while winterizing.

Shoot me a price and I can Venmo/Zelle you the cash to cover the parts and shipping to 47122.

Thanks!

These are from a 2017 240 not 190 but without getting a shipping quote I would sell them to you for $40 including shipping and the box fees. Let me if you’re interested and I will send you my Zelle info.

 

[Ronnie]

I surprised nobody has asked about the clean out plugs.

 

[2kwik4u]

These are from a 2017 240 not 190 but without getting a shipping quote I would sell them to you for $40 including shipping and the box fees. Let me if you’re interested and I will send you my Zelle info.

I'll take 'em. PM me the info and I'll send the cash.

Thanks Ronnie!

 

[DRAT]

Sorry if this has already been asked and answered, but I could use a couple of cushions for my 2015 AR240. Do you know if yours will fit? They LOOK exactly the same.

 

[Ronnie]

@DRAT , I think so but I’m not sure. The 240s were slightly redesigned in 2015 (?) and represent the second / final generation of 2040s, 6” longer in the bow as I recall, integrated keel and rudder as well as wet storage behind the swim deck seats. If this is correct the. Cushions for the 2017 should fit unless yamaha redesigned the interior layout between 2015 and 2017. Let me know the measurements of the cushions you need and I will let you know if mine match. if you want start a conversation with me to take this private, send me your zip code and I’ll get a shipping quotes as well.

 

[BigAbe75]

Sorry if this has already been asked and answered, but I could use a couple of cushions for my 2015 AR240. Do you know if yours will fit? They LOOK exactly the same.

Yes, ‘15 and ‘17 should be the same. You could look up the part numbers just to double check though.

 

[DRAT]

@DRAT , I think so but I’m not sure. The 240s were slightly redesigned in 2015 (?) and represent the second / final generation of 2040s, 6” longer in the bow as I recall, integrated keel and rudder as well as wet storage behind the swim deck seats. If this is correct the. Cushions for the 2017 should fit unless yamaha redesigned the interior layout between 2015 and 2017. Let me know the measurements of the cushions you need and I will let you know if mine match. if you want start a conversation with me to take this private, send me your zip code and I’ll get a shipping quotes as well.

Yes Ronnie, will DM. Thank you!!

 

[DRAT]

Yes, ‘15 and ‘17 should be the same. You could look up the part numbers just to double check though.

That smells like homework, BigAbe. I don’t like it! ?

 

[erittenhouse]

Do you still have the Start Button Comp?

 

[Ronnie]

Do you still have the Start Button Comp?
View attachment 197586

So you have pic of it? Are you referencing the control wheel is mounted on the dash and that works with the touch screen?

 

[erittenhouse]

So you have pic of it? Are you referencing the control wheel is mounted on the dash and that works with the touch screen?

Yes, Sir. You are correct.