Potential new 2019 SX190

[Farmdog267]

I came from a 2005 Four Winns 170 Horizon bow rider with a 3.0 i/o. I was mostly concerned with how the boat would drive and honestly was wishing I could have gotten the boat with a outboard. I purchased my 2018 SX190 from the Atlantic City boat show last spring and it took some getting used to driving and handling but after thrust vectors and the Reverse nozzle upgrade, its made quite a difference. The open seating on the yamaha compared to the other brands was another big win in why I chose yamaha. Plus I trust their engines and I have a great local dealer.

 

[obrien19]

Well picked up the boat yesterday, now have to wait for the warmer weather. But not even having the boat in my possession for a full day had an issue pop up. Took the removalable seat cushion off the engine hatch and one of the rear snaps came right out of the cushion. ?

 

[2kwik4u]

Well picked up the boat yesterday, now have to wait for the warmer weather. But not even having the boat in my possession for a full day had an issue pop up. Took the removalable seat cushion off the engine hatch and one of the rear snaps came right out of the cushion. ?

Looks great.

Which cover is that?

Did they give you the factory shipping cover? it appears to cover much more than my 2017 cover does.

 

[mwalker4]

For the early 2019s , the factory used the 2018 bunk configuration which places the bunk on/near the speedometer paddle wheel and across a rake. They have since corrected it. Something to check.

 

[obrien19]

Looks great.

Which cover is that?

Did they give you the factory shipping cover? it appears to cover much more than my 2017 cover does.

Not sure what cover it is, paper work shows the "yamaha mooring cover". Cover was included in the boat show special when I ordered the boat.

 

[obrien19]

For the early 2019s , the factory used the 2018 bunk configuration which places the bunk on/near the speedometer paddle wheel and across a rake. They have since corrected it. Something to check.

I've seen a few other threads on here, regarding the bunks not being configured correctly. I checked while the boat was still at the dealer and the trailer bunks are sitting in the correct position.

 

[obrien19]

Well since weather has been terrible so far this spring, needed something else to do with the boat so decided to at least get my Simrad GO5 installed in the dash. Turned out pretty nice.