replacement scupper valve

[rick johnston]

getting ready to replace the factory original and want a good stainless replacement. Have a name, Attwood Scupper Valve and dimensions but where do you buy?
2004 SX230
any suggestions?
thank you all
Rick J.

 

[Scottintexas]

you can buy it on Amazon,

Have you seen the posts in our FAQ tab about the scuppers,

https://jetboaters.net/faq/how-to-replace-a-broken-or-waiting-to-break-plastic-scupper.113/

 

[Gym]

$58.28 + shipping.
https://www.iboats.com/shop/attwood...RghlOdlIaxSa6mZ7-DwJr95f2sF_ucdRoCuV4QAvD_BwE

 

[boudin]

I bought this one:
https://www.replacementboatparts.com/stainlesssteellongscupper112hose.aspx

I used 3M 5200 to seal it in. Had trouble getting the scupper hose back on and had to expand it a little with a muffler expander tool, then it slipped right on.

When using sealant, it a job for 2 people. Someone to hold the scupper in place from the back of the boat, and then someone to tighten it from the inside with a large set of pliers.

-Greg

 

[Gym]

You might want consider using 3M 4200 or life calk. If you ever needed to remove a fitting with 5200 you'll need dynamite.

 

[boudin]

A heat gun will soften-up 5200 and it can be removed.

-Greg

 

[Papa]

I had a 05 SX230 and used the Attwood scupper. Wood definitely use 5200 to seal. Should never have to take this out again.
Papa