We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
What was the problem? I am having the same issue this year, my starboard engine just started to rattle. Thank youWell I pulled the pump and the sound didn’t go away. Pump looked good, impeller looks new and shaft spins smooth and easy.
Starboard no pump video
View attachment 105658View attachment 105659View attachment 105660
Well I pulled the pump and the sound didn’t go away. Pump looked good, impeller looks new and shaft spins smooth and easy.
Was this issue resolved?
I didn’t but will take a look and see if I can isolate the noise to the bearing.did you check the intermediate bearing and vibration dampener on the back of the engine
there is a rubber vibration dampener between the 2 aluminum pieces either the engine alignment is off or the rubber may be damaged and need to be replaced
I haven’t figured it out but I haven’t put a lot of time into it. I need to check the mounts and the vibration dampener.