• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Towing Question

This summer I had a tower speaker fall off while towing. I know where it happened. Just south of downtown Cadot, WI at the bridge. That's where we hit a big bump unexpectedly. Didn't notice though until we got back to the cabin in Augusta.

Anyone have an idea on what kind to replace with? Budget minded of course...
 
On the MFI trailers (not so sure about the Shorelaner) there is wiggle in the bow stop. In my case, I can get the boat as tight to the bow stop as I can, cinch up the transom straps, and once that bow stop shifts, the boat will be loose again. There's lots of posts out there about welding the bow stop to stop this wiggle.

For me, part of my standard procedure is make sure the bow stop and transom straps are tight at the top of the launch. Then before leaving the parking lot at a speed of no more than 10MPH, I do a hard stop. This stop makes the boat slide forward on the trailer. I then go back and tighten the transom straps and winch (all three will be loose). Once I do this though, that boat and trailer are one unit and it doesn't move.
 
Back
Top