• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

TR-1 engines oil check

NoProplems

Active Member
Messages
1
Reaction score
0
Points
30
Boat Make
Boatless
Year
NA
Boat Model
Other
Boat Length
NA
I looked at a used 2018 AR210 recently (TR-1 engines). When I checked the oil, the starboard engine had no oil on the dipstick, the port side had oil on the very tip (nowhere close to the minimum fill line). The boat was level and the engines were run for about 5 seconds each before checking. Some people have told me the engines have to run for 5 minutes or so before checking the oil because it is a dry sump. Others say they check when the engine is cold and always have oil on the dipstick. Can anyone please shed some light on this?
 
Manual for TR1 days you have to run it first..5-6 minutes...

Screenshot_20200207-064756_OfficeSuite.jpg
 
Back
Top