dgfreeze
Jetboaters Commander
- Messages
- 856
- Reaction score
- 927
- Points
- 187
- Location
- Central Ohio
- Boat Make
- Yamaha
- Year
- 2006
- Boat Model
- SX
- Boat Length
- 23
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Traction mat fitment issue
- Thread starter dgfreeze
- Start date
pcriley
Jet Boat Lover
- Messages
- 21
- Reaction score
- 15
- Points
- 82
- Boat Make
- Yamaha
- Year
- 2006
- Boat Model
- SX
- Boat Length
- 23
They were too wide in some spots and too narrow in others. Not quite as off as the ones in this thread, though. I get the feeling there is some variance in the Yamaha manufacturing process
dgfreeze
Jetboaters Commander
- Messages
- 856
- Reaction score
- 927
- Points
- 187
- Location
- Central Ohio
- Boat Make
- Yamaha
- Year
- 2006
- Boat Model
- SX
- Boat Length
- 23
Yeah, it would seem... well, I'm glad I only had issues with one mat, and I really don't think it's going to be a problem, so I guess I'll just ride this one out. Gonna look funny next week when we are at the lake, with that one mat missing...lol
WiskyDan
Jetboaters Admiral
- Messages
- 1,508
- Reaction score
- 3,354
- Points
- 267
- Location
- Jackson, WI
- Boat Make
- Yamaha
- Year
- 2018
- Boat Model
- 242 Limited S E-Series
- Boat Length
- 24
Would you be able to take some quick measurements of the position of the latch that’s causing you trouble so I can compare to mine?
dgfreeze
Jetboaters Commander
- Messages
- 856
- Reaction score
- 927
- Points
- 187
- Location
- Central Ohio
- Boat Make
- Yamaha
- Year
- 2006
- Boat Model
- SX
- Boat Length
- 23
I can get better measurements this evening, but if I recall correctly, the good side is 7 1/4" from the back edge of the hatch, and on the bad side, it's 7 3/4" from the back. Also, the starboard side hatch is a little smaller than the port side, but not enough to affect anything.
Similar threads
