• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Wakeboard rack mounting on AR195

Bulletlines.com Yamaha specific 1 7/8 fits the rear.1590791547313.jpeg
 
I picked up a Monster Tower Universal with Swivel and ordered a 1 7/8 back during a Xmas sale. I planned to attach to the rear tube on the starboard side. That size certainly doesn’t fit.

Now, I’m not sure if I should try building up the rear some and use no insert or try another size. Any advice? I’d like to get this thing mounted finally.
Thanks.
 
There are two different sizes, one is 1 7/8 the other is 2 3/8.
 
There are two different sizes, one is 1 7/8 the other is 2 3/8.

Thanks.

With the powder coat on the 1 7/8, the Monster Tower 1 7/8 insert doesn't quite fit. I called them yesterday and they were super helpful and are sending me the 2" insert to use on the 1 7/8 rear tube. I read in a separate thread on this forum that folks are using the 2" from Monster with rubber fusion tape to give the tube a little extra diameter to hold firm on the 2" insert. Monster indicated that regular electrical tape would work too.
 
Any suggestions for a single wakesurf board rack for a 2020, 212S? Also wondering what the be the best color with the gray tower? Didn't think we would need one but sure is a pain to the have the board in the cabin! Hoping to get one ASAP.

Thanks!
 
Back
Top