• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

LED lights acting weird after I just installed

FINALLY! I plugged in and tested (of course before running the wire through the frame) the replacement harness that Shorelandr sent me and BAM! the LED tailight is working as it should now! Now, I have the wonderful task of pulling through the new harness from front to back and routing the individual cables to each side marker light and center light. Feels good to finally have the issue fixed!
 
bleudyno said:
FINALLY! I plugged in and tested (of course before running the wire through the frame) the replacement harness that Shorelandr sent me and BAM! the LED tailight is working as it should now! Now, I have the wonderful task of pulling through the new harness from front to back and routing the individual cables to each side marker light and center light. Feels good to finally have the issue fixed!
Click to expand...
Use the old wiring and attach the new with electrical tape to use to fish the wires through. Quick and easy. I'm glad my new lights worked out of the box. I was concerned I'd have the same issue. WHEW!
 
Just finished up and thats exactly what I did and used an old wire hanger to fish out the individual side marker light wires.

suke said:
Use the old wiring and attach the new with electrical tape to use to fish the wires through. Quick and easy. I'm glad my new lights worked out of the box. I was concerned I'd have the same issue. WHEW!
Click to expand...
 
You must log in or register to reply here.

Similar threads

MilesPrower
Replaced all the rocker switches at the helm with backlit switches
    • Like
    • Love It!
    • Informative
Replies
7
Views
492
MilesPrower
MilesPrower
MTREADER
Port Engine just quit. HELP
Replies
8
Views
1K
MTREADER
MTREADER
C
17 Scarab twin 250 port engine turns over, no start P0340, sensor replaced
Replies
7
Views
251
Luc Lafreniere
Luc Lafreniere
Huv1
LED Lights Install
Replies
4
Views
441
Huv1
Huv1
TimW451
RAM Bed Rail Hooks
    • Informative
Replies
0
Views
342
TimW451
TimW451
Back
Top