• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

$12 homemade surf/wakeboard storage rack

Farny

Jetboaters Captain
Messages
1,151
Reaction score
968
Points
207
Location
Spring TX
Boat Make
Centurion
Year
2022
Boat Model
Other
Boat Length
23
So I was getting super tired of leaving wakeboards and surfboards leaning up against the wall in the garage or taking them in and out of the house when coming and going to our lake sessions. I am OCD about garage organization so was driving me nuts!! Finally built an inexpensive storage rack - parts & tools
1- 8’ 1X3 - Lowes $2.49
3- 4’ 7/8” dowel rods $7 total
6 screws (laying around the house)
7/8” paddle wood bit
Screw gun /drill
Wood glue
Electric sander (100 grit)

msg me if you want to know anything else.
 

Attachments

  • 35ADC4B7-2A0E-47DD-B775-0214BE642CD3.jpeg
    35ADC4B7-2A0E-47DD-B775-0214BE642CD3.jpeg
    1.3 MB · Views: 33
Nice job!! Doesn’t take much to make a simple board rack. I did something similar with scrap metal.
1651420803406.jpeg
 
Back
Top