AuburnVFR
Jet Boat Addict
- Messages
- 85
- Reaction score
- 151
- Points
- 102
- Location
- Auburn, AL
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- SX
- Boat Length
- 19
The 19ft hulls do not have a thru-hull anchor locker drain. They only drain into the ski locker, not directly overboard.
Seal the cleanout tray perimeter and around the access hatches and fittings. Once you see the job the factory did sealing these, you will want to pull out all the watertight fittings and redo them yourself. Mine had just the tiniest bead of sealant with large gaps with no sealant at all. And then plug the rear cup holders as they also drain directly into the bilge and seal the perimeter if they are getting a lot of splash or wash-over.
Seal the cleanout tray perimeter and around the access hatches and fittings. Once you see the job the factory did sealing these, you will want to pull out all the watertight fittings and redo them yourself. Mine had just the tiniest bead of sealant with large gaps with no sealant at all. And then plug the rear cup holders as they also drain directly into the bilge and seal the perimeter if they are getting a lot of splash or wash-over.
Last edited: