• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Drain plugs ?

S

scokill

Jetboaters Admiral
Messages
1,576
Reaction score
1,184
Points
272
Location
Rowlett, TX
Boat Make
Yamaha
Year
2008
Boat Model
AR
Boat Length
23
kthrash said:
I used some simple green/purple power sprayed everywhere and a pressure washer.. Looked like new..

Spray it down, let it soak and then hit it with a hose or pressure washer. Just like any engine dont hold the stream of water on electronic connections for any length of time.. just a sweeping motion is fine. I like the pressure washer cause it doesnt put as much water in a direct stream I use the Fan setting about 12" wide 12" from the tip..
Click to expand...
Simple green for me too!
 
You must log in or register to reply here.
Top