Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
I have many questions without even have picked it up yet. First important questions after taking safety certification I noticed my boat had no front lights. Is this not required for night driving?
im waiting for mine too!
it should have the front lights. are you certain of this? yes it's federally required in all waters. waverunners don't have them because they aren't allowed to run between dusk and dawn. if there's no lights, my 4th of july plans just changed
im waiting for mine too!
it should have the front lights. are you certain of this? yes it's federally required in all waters. waverunners don't have them because they aren't allowed to run between dusk and dawn. if there's no lights, my 4th of july plans just changed
...
be sure you understand about the carbon seal and running engine out of the water, that used to be a potential problem, we have lots of good info in the scarab/rotax section,
mod #3 is replacing the cup holders with ones that drain. i thought i had the thread bookmarked, but couldn't find it. however, i was able to find the cupholders in my amazon history.
the thread i was trying to find used these with the additional change of adding some clear tubing to route the ones above the engine to the bilge.