• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

LED Speaker Rings and Cupholder Rings Project

Nice Detonate!! :winkingthumbsup"
 
Who needs a tower nav light when you have cool speaker lights up there?? :)
 
I KNOW that is way more than a 2-beer job! :woot:
 
Uhhhh, yeah.

image.jpg

The reason there is a can in there with the aluminum bottles is because I had to go to the store to get more beer.
 
Well I guess I need to get more beer then, I don't have enough to get through this project. I haven't even cut rings yet
 
Awesome! Now get out there and enjoy the long weekend!!
 
@Detonate Is that 4 channels running Jim, or just two? I found another 4 channel controller for $19, but have no idea if it is a player. Almost everything out of China is a fraction of the cost, and the same place all of it comes from. Looks good!
 
That is really cool. Maybe next year I can tackle a light upgrade. All the know how is right here on this board. I just need to tap into it.
 
Congrats on a job well done!
 
@Detonate Is that 4 channels running Jim, or just two? I found another 4 channel controller for $19, but have no idea if it is a player. Almost everything out of China is a fraction of the cost, and the same place all of it comes from. Looks good!
Yeah, that's all 4...
 
Finally had a chance to cut all my own rings. 15 cup holders and 10 speakers image.jpg
 
Were going to be able to see your boat from 39,000 feet Cory! What else can you do with that machine?
 
I bought it for my woodworking hobby, it just happens to work perfect for this too image.jpg
 
Very nice! Will it run any router bit, or just a straight cutter more or less? I noticed that @Detonate still put a round over on his rings to bevel the edges, which is good on exposed edges of the speaker rings. Is that a secondary cut your machine would do? It is a CNC router isn't it? I bet there are hundreds of applications you could use it for on our boats!
 
That's so cool. I wouldn't mind donating for tools and materials for projects. ;)
 
I wish I were that handy
 
I was down at a plastics supplier today. They have this black acrylic. It is very cool but only comes in 1/8". They had a loop of RGB led strip inside a box wth a sheet of this acrylic over it. I have many ideas about this!
 
Back
Top