Bennie
Jetboaters Captain
- Messages
- 1,550
- Reaction score
- 1,468
- Points
- 222
- Location
- Loxley, AL
- Boat Make
- Yamaha
- Year
- 2015
- Boat Model
- Limited S
- Boat Length
- 24
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
The oil was at the correct level before I changed it. 3.5L per engine.did you happen to look at the dipstick before you took the oil out? maybe it was over to begin with?
3.5L out of each engine or total?
could it be the new oil is still on the inlet area and showing up on the stick? maybe let it sit for an hour a measure again?
Even if it is super full, just don't start the engines (it could end up ruining your air filter) you can just suck some out,