• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Portable Dock Cleats

sunbyrned

Jetboaters Captain
Messages
1,354
Reaction score
884
Points
222
Location
Louisville, KY
Boat Make
Yamaha
Year
2012
Boat Model
242 Limited S E-Series
Boat Length
24
I didn’t know this was a thing so I’m posting in case it can help others out. I could have used something like this over the weekend. The reason I needed them was to tie my bumpers to them instead of hanging off the boat. The dock I was using was higher than the boat. I ended up hanging them off the tower, but that doesn’t cover the length of the boat.

 
In case others prefer a different design, I use these: DOCK EDGE EZE Docker

I suspect both designs work well for what they are. I wouldn't trust them to hold my boat for extended periods of time, but I use them exactly like you, for fenders and such. But even as a temporary quick tie down. They hold pretty well if you don't have large waves.
 
I didn’t know this was a thing so I’m posting in case it can help others out. I could have used something like this over the weekend. The reason I needed them was to tie my bumpers to them instead of hanging off the boat. The dock I was using was higher than the boat. I ended up hanging them off the tower, but that doesn’t cover the length of the boat.

I read the title. This shape is the first thing that came to mind. Really cool gadget.

Wonder how it holds up if you release tension on the line? Like if that bumper gets pushed upwards from getting stuck between the boat and dock and wakes raising/moving the boat.

Had some friends that always had cheap carabiners on hand for this sort of thing as well. The would just clip the dock lines to the structure of the floating docks around them, then tie off to a cleat. Won't work on a concrete dock though.
 
I keep a pair of the overtons ones on my boat and use them a couple times a year in temporary situations like loading, unloading, and a quick pop into a marina store. Very handy but would not leave boat unattended very long with them.
 
I keep a pair of the overtons ones on my boat and use them a couple times a year in temporary situations like loading, unloading, and a quick pop into a marina store. Very handy but would not leave boat unattended very long with them.
Good advice. Thanks!
 
We've found these to be quite handy at times on securing the boat when cleats are few and far between.
 

Attachments

  • 1622757448900.png
    1622757448900.png
    4.1 MB · Views: 26
Back
Top