- Messages
- 5,878
- Reaction score
- 5,355
- Points
- 452
- Location
- Florida
- Boat Make
- Yamaha
- Year
- 2021
- Boat Model
- Other
- Boat Length
- Other
I was taught to resurface all of them but that was the OLD DAYS !!!
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Super charged 2019 AR190
- Thread starter B0at1n
- Start date
- Tagged users None
B0at1n
Jetboaters Lieutenant
- Messages
- 517
- Reaction score
- 549
- Points
- 167
- Location
- Little elm
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- AR
- Boat Length
- 19
So, the entire motor needs to be replaced, looking for a used 1.8l motor or a ski with one would work too if anyone knows of one for sale.
think I’m going to forgo the SVHO.
think I’m going to forgo the SVHO.
swatski
Jetboaters Fleet Admiral 1*
- Messages
- 12,806
- Reaction score
- 18,566
- Points
- 822
- Location
- North Caldwell, NJ
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- AR
- Boat Length
- 24
Do you have any more detail on what's happen, the root cause, what's been damaged and how?
--
B0at1n
Jetboaters Lieutenant
- Messages
- 517
- Reaction score
- 549
- Points
- 167
- Location
- Little elm
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- AR
- Boat Length
- 19
They said the motor over heated to a high enough temp to burn the oil, which then took out the lower half of the motor. Guessing when the casting plug popped out of the exhaust and the over heat alarm came on, that’s when it went to 300+ degrees. Still waiting to see if Yamaha is going to cover it, but I’d say my odds are under 10% so I’m just planning for the worst.
tdonoughue
Jetboaters Admiral
- Messages
- 4,890
- Reaction score
- 4,022
- Points
- 417
- Location
- The Woodlands, TX 77381
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- AR
- Boat Length
- 24
Owch. Had to be pretty hot to trash the lower half of the motor...
B0at1n
Jetboaters Lieutenant
- Messages
- 517
- Reaction score
- 549
- Points
- 167
- Location
- Little elm
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- AR
- Boat Length
- 19
W
I flushed the motor after wards but didn’t realize it had done this or we could of saved the motor, took about 20 - 30 hours for the rest of the damage to show up.
renters were on the boat when the casting plug came out, no water was going into the motorfor who knows how long, I’m sure it got really hot.
I flushed the motor after wards but didn’t realize it had done this or we could of saved the motor, took about 20 - 30 hours for the rest of the damage to show up.