• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

TACHOMETER MAKING NOISE (I THINK) 2016 AR 240

Steen1717

Jet Boat Addict
Messages
25
Reaction score
13
Points
97
Location
Mt pleasant pa
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24
Anyone out there have a buzzing noise coming from the tach or near the tach, just noticed this yesterday out with no music on. very weird sounds like a vibration or buzz noise? sounds like its coming from the starboard side
 
While driving or no?
 
Yes, i can hear it a little at idle but the higher the rpm the higher it is. Ill be out tom im may rev the port side to see if does it.
 
@Steen1717 This comes up as a perennial topic here, some have had good luck looming the bundle of tach/steering cables coming across the fuel tank into a pool noodle or something.
I've not had that particular issue, but here is my setup - I have a bunch of big gauge wires going across and don't want to worry about chafing.
upload_2017-8-26_17-44-26.png

--
 
Back
Top