• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Search results

  1. J

    ECU repair or replacement

    702 mangrove ave #140 Chico, Ca 95926
  2. J

    ECU repair or replacement

    Carmo
  3. J

    ECU repair or replacement

    +1 (916) 799-4327 he will take care of ya!
  4. J

    Help - Engine not getting to full RPM intermittently

    Ecu
  5. J

    MR1 ECU or injector or something else?

    This is DEFINITELY an Ecu issue. This guy can fix it for about $500. +1 (916) 799-4327. info@regulatorrectifier.com My situation was the same with loss of rpm, fuel in oil and strong smell of gas. Don’t stress too much. It’s really not that big of a deal. Just make sure you change the oil a few...
  6. J

    Ecm replacement

    This will guide you through. https://jetboaters.net/threads/help-engine-smoking-and-lack-of-power.7417/
  7. J

    2005 230 things to look for

    Also, after doing a compression test, make sure to smell the oil on the dipstick. If it smells strongly of gasoline or is very thin on account of gasoline then the ecm is bad. $500 to fix and about a month of waiting. Good luck!
  8. J

    2005 230 things to look for

    https://jetboaters.net/threads/known-issues-for-boat-years-2003-2009-with-mr1-engines.15464/
  9. J

    Help ! New to the Jet life

    Put these on and replace the scupper. Then take it out for a test run. Should be all good. Cobra EZ-Locks
  10. J

    Help ! New to the Jet life

    Your plug in the scupper is messing up the wheel for the speedometer. There are a couple of different threads on how to replace a scupper with stainless just search around and you will find it. The clean out plug not being attached correctly will cause cavitation which explains the higher...
  11. J

    Bargains (Not mine) $5K AR230 project in NC

    This is cool because you can re make it how you want it. Sea deck with matching upholstery, etc... I bought a tore up AR230 and made it beautiful. Mine is HO tho.
  12. J

    Is this a good price?

    Looks like parts alone are about $475 off of Amazon. So I guess the question is $200 a good price for labor?
  13. J

    Is this a good price?

    Local stereo shop wants $675 to replace the deck and two built in remotes (the one on the stern and one to the left of the steering wheel). Kenwood marine is what we are looking at on my 2005 ar230. Let me know. TIA!
  14. J

    Starboard at 9600 rpm WOT

    Engine oil
  15. J

    Starboard at 9600 rpm WOT

    Also, the engine in question should have a higher level if it is filling with gas.
  16. J

    Starboard at 9600 rpm WOT

    Good question. Check it cold and then if you can’t tell run warm.
  17. J

    Starboard at 9600 rpm WOT

    The oil will be thin and lighter in color. It will also smell like gas. Use the engine oil on your “good” engine as a baseline.
  18. J

    Starboard at 9600 rpm WOT

    I figured it out before that happened thank god. It’s a 2005 so no warranties lol.
  19. J

    Starboard at 9600 rpm WOT

    I had lower rpms on my starboard engine. Like 7500. It was due to gas in the oil caused by wide open injector because of faulty cpu.
  20. J

    2004 Sx230 price question

    I wouldn’t go under $14,000
Top