Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

How To Remove Starter

So I am trying to remove the starter from my Speedster 150, but it is stuck. There are only two bolts, which I removed. I checked the diagram (http://www.seadoopartshouse.com/oemparts/a/sea/500ccbdaf870021b3c6a732b/engine-block) and verified only 2 bolts. Anyone with any experience remvoing the starter?

------------------------------------------------SOLUTION------------------------------------------------

Use one of these and pry it out
https://www.amazon.com/Stanley-55-1...496169555&sr=8-3&keywords=pry+bar+nail+puller

Last edited: May 30, 2017