Sean R
Jetboaters Captain
- Messages
- 720
- Reaction score
- 888
- Points
- 207
- Location
- Acworth GA
- Boat Make
- Yamaha
- Year
- 2020
- Boat Model
- 212S
- Boat Length
- 21
No mine must be different if my boat was here i would take a picture. I had a 2017 Ar190 and all I had to do was remove 4 bolts and the pump, impeller and shift would pull straight out. On my 2020 212S its 5 bolt (four big and one small) I remove those and had to pry the pump housing from the transom plate. The only reason you need to pry off is because of sealant. Then the pump, cone, impeller, shaft all pulls out in one big assy. Hopefully that makes sense.