• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

LS2000 / Lx210 fuel sender upgrade replacement

Ronald Dillow

Jet Boat Addict
Messages
46
Reaction score
22
Points
97
Location
Carpentersville, Illinois
Boat Make
Yamaha
Year
2002
Boat Model
LX
Boat Length
19
I spoke with Don a little bit ago. He told me that Yamaha used a couple of different units back then. The one with 3 wires is NOT an isspro unit. He said the third wire is for a low gas light. So The new one I bought will work, I just won't have the idiot light, which I don't think is that important. He also told me that the 5 holes are not evenly spaced so I need to make sure the new unit is put in right.
 

chef_steo

Active Member
Messages
2
Reaction score
0
Points
30
Boat Make
Yamaha
Year
2004
Boat Model
LX
Boat Length
21
Fuel Senders for the LS / LX series boats. Mine was for the LS2000 (99')
I spoke to ISSPRO today, they MFG the original fuel sender for the LS2000 boat model. plug n all (12.5" long stem/sender) Spoke to Don in Technical support, he has the exact model for replacement with all the new technology to accommodate the ethanol and fuel additives. I found ISSPRO name and P/N on the sleeve for reference. Plug n play setup. $110.48 + freight. 1-888-447-7776

He informed me failure is due to the newer fuel additives and corrosion properties not present during the time frame of MFG. in 2000' All the new units are up to today's standards. Cheers to them.

If it's a ISSPRO unit, call Don First, they can duplicate all models in house if not in stock. Some members bought the generic version that's 1/2" shorter, that's fine but not reading the exact amount of gas left in tank can be a burden.

would this fit a 2004 lx210?
 

treeskier

Jetboaters Commander
Messages
303
Reaction score
320
Points
187
Location
Ocean City, MD
Boat Make
Yamaha
Year
2016
Boat Model
Limited S
Boat Length
24
would this fit a 2004 lx210?
Just call ISSPRO they are fantastic with their product knowledge and customer service. If you have the info from the old sender or just pics of the top where the wires connect and the overall length you need they can make it for you or sell you something close from their stock. I had them send me the off the shelf model that's a little short...that's my reserve tank...I rarely let it get below 1/2 a tank anyway to keep condensation from forming.
 

Speedling

Jetboaters Admiral
Messages
5,099
Reaction score
4,288
Points
432
Location
Cedar Lake, IN
Boat Make
Yamaha
Year
2008
Boat Model
SS
Boat Length
21
Yeah, just call them. Most everything is customizable anyways. They will have something pretty close to whatever you need.
 

MrHollywood512

Active Member
Messages
3
Reaction score
3
Points
27
Location
Austin, TX
Boat Make
Yamaha
Year
2000
Boat Model
LS
Boat Length
19
Spoke with Don today and he is sending a new unit for me also. Should be here Monday. Thx for the info guys.
 

Fastjet

Well-Known Member
Messages
59
Reaction score
8
Points
47
Boat Make
Yamaha
Year
2003
Boat Model
LX
Boat Length
21
Good info guys mine is not workin either
 
Top