• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Post up your funny MEMES (Nothing Political Please)

FB_IMG_1586134759962.jpg
 
382CD73E-F474-4DA4-BE45-50A0D86940E4.jpeg
 
F9339D29-508F-46D2-85BB-9AAA6EE9E452.jpeg
 
Screenshot_20200406-162359.png
 
20200407_093628.jpg
 
"I'm so excited --- it's time to take out the garbage. What should I wear?"
lol

--
 
"I'm so excited --- it's time to take out the garbage. What should I wear?"
lol

--

Flip flops and boxers like I did this morning.
 
"I'm so excited --- it's time to take out the garbage. What should I wear?"
lol

--
Your in New Jersey...
5HH84_AS01.jpeg
Or DIY option
corona-virus-creative-mask-14-525x500.jpg
 
"I'm so excited --- it's time to take out the garbage. What should I wear?"
lol

--

If you can't go full Hazmat, you can go full Vermonter! Yes, under all that is a N95 construction mask, had a box on the shelf for years. This is how I take out the trash and go for groceries...Just kiddin. ;) I do wear the masks and nitrile gloves. The clean room suit and helmet are optional (just for the photo) if the faceshield were clear plastic instead of mesh...gonna put some Saran wrap over it! ? Adding humor to a very serious situation around the Northeast.

20200408_062036.jpg
 

Attachments

  • 20200408_062058.jpg
    20200408_062058.jpg
    674.1 KB · Views: 5
Last edited:
1586350632038.png
 
1586350922321.png
 
20200409_114422.jpg
 
Perfect post @zipper I tell every salesman trying to sell me the latest and greatest penetrating oil, If I cant get it with an impact I'm breaking out the torch. Don't have time to mess around with penetrating oils.
 
I agree. This past Summer I had to change the pitman arm on my 06 duramax 2500. I broke 2 pitman arm pullers doing it. Anyway I had to remove the plow frame to get wrench access to the nut. I gave up using 1/2" drive sockets when I broke my 1/2" breaker bar trying to break the nuts loose. The 4' piece of 1 1/2" pipe used for leverage helped reach it's breaking strength. I resorted to the 3/4" drive set, but did not have the turning room. I went to the torch and had the frame off in minutes.
 
Last edited:
Back
Top