Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

Steering knob

Thread starter 01ChevyGuy
Start date Aug 4, 2024

01ChevyGuy

Active Member

Aug 4, 2024

I 3D printed an adapter to add a steering knob to my SX210. I was gifted a steering knob but the included bracket didn't fit the Yamaha wheel, so printed this bracket. Fits snug and works great - had it out a few times now and really like the steering knob, especially navigating the no-wake zones.

Printed in NylonX, but ABS or ASA should work too. Attached with two 10-32 x 1.5" stainless screws, washers, and lock nuts.

Steering knob: Amazon asdmm, but should fit any knob that attaches with a 1/2" nut

3mf files are posted on Printables