bronze_10
Jetboaters Admiral
- Messages
- 4,672
- Reaction score
- 4,643
- Points
- 387
- Location
- Raleigh / Wake Forest Area..
- Boat Make
- Yamaha
- Year
- 2008
- Boat Model
- SX
- Boat Length
- 23
Does the thumb button press before u tey to pull them?
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Use the ice method. Then use a 2x4 to distribute the weight across the swimdeck. Put the floor jack on the 2x4, loop a dockline on the handle. Other end of the dockline on the jack pad. Pump your floor jack. It broke my plugs free.You could try a floor back with rope to lift it
You could put some pressure on it and then tap it on the bottom side
Do you still have the silicone issue you posted about back in august ?
https://jetboaters.net/threads/limited-232-impeller-cleanout-plugs.19046/
every once in a while we hear about someone who has tried to permanently seal the plugs in the tubes, I'd be interested to see a picture and whether you just have the extra silicone from the factory that overflowed,
do you know if your boat was ever used in Salt water or left in a slip in the water for extended periods?
Do you still have the silicone issue you posted about back in august ?
https://jetboaters.net/threads/limited-232-impeller-cleanout-plugs.19046/
every once in a while we hear about someone who has tried to permanently seal the plugs in the tubes, I'd be interested to see a picture and whether you just have the extra silicone from the factory that overflowed,
do you know if your boat was ever used in Salt water or left in a slip in the water for extended periods?