• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

Dreaded Connext issue

PJ73

Jetboaters Lieutenant
Messages
702
Reaction score
563
Points
167
Location
Germantown, Wi
Boat Make
Yamaha
Year
2019
Boat Model
X
Boat Length
21
2019, 212X never an issue. I installed perfect pass and suddenly every single error message came on. I disconnected the entire pass system and I'm still getting it. I pulled the batteries for a few hours, no change. At this point, considering selling the damn boat. What the hell am I missing. The perfect pass system has nothing to do with the connext system. others I know have connected it with no issues, I do it and suddenly I have a 4500 lbs canoe on the side of my house. Engines start but I get the ERR message. Radio system has me locked out.
 
Well,
If everything was fine before that install then it was the pp thing.

Sometimes it takes several cycles of power on and off for alarms to clear. I think it’s 5 cycles if memory serves.
 
What error message are you getting? I got two, one cause by a bad tach and the other because I (stupidly) cut through the remote for the stereo.
 
Went out today to rip it apart, just rechecked all connections and voilà, the whole system works, no error messages. Fucking crazy, must have been a loose connection.
 
Went out today to rip it apart, just rechecked all connections and voilà, the whole system works, no error messages. Fucking crazy, must have been a loose connection.
I had a similar issue when I installed my ridesteady. It was user error on my part. There was a connection to one of the main PCM's that's inside one of the storage lockers where I ran the lines through. I pushed them all and one I heard a click. I'm guessing I pulled that loose by accident. All was well after that.
 
Back
Top