• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Helix 5 Not Showing Depth Correctly

GoodCubanito

Jet Boat Addict
Messages
142
Reaction score
42
Points
97
Location
Lewisville, Texas
Boat Make
Yamaha
Year
2016
Boat Model
Limited S
Boat Length
24
I have bought and installed a Helix 5 on my 2016 Yamaha 242 Limited S. I placed the transducer at the bottom of my engine bay (humminbird support said it is ok) but it doesn't show correct depth, sometimes it shows 1042 or 1033 feet, not sure what I am missing here.
Should I place the transducer on the outside bottom of the boat?

Thanks in advance!
 
I have bought and installed a Helix 5 on my 2016 Yamaha 242 Limited S. I placed the transducer at the bottom of my engine bay (humminbird support said it is ok) but it doesn't show correct depth, sometimes it shows 1042 or 1033 feet, not sure what I am missing here.
Should I place the transducer on the outside bottom of the boat?

Thanks in advance!

I do not think your set up will work that way…. the transducer needs to be in the water.. what do the paper instructions say about mounting ?
 
Back
Top