Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

Electronics-Stereo/GPS/Chartplotter/Electrical etc

Help Identifying Stereo Connector

Thread starter SamN44
Start date Jun 29, 2020

SamN44

Jetboaters Lieutenant

Jun 29, 2020

Hey guys, I am on the final part of my amp install and I would like to wire the speakers to the amp using a stock connector in case I need to repair or replace in the future. To me, it looks like a molex connector. Another member posted this item matched his 2019 SX 210: Amazon.com: Molex -1 Complete Set - (12 Circuit) w/14-20 AWG, Wire Connector - 2.13mm D, Latch Lock, MLX: Industrial & Scientific

It looks similar, but it's hard for me to tell if all of the pin hole shapes are the same. Anyone have any ideas?