new toys for the garage.... cars or anything

[Scott griffith]

Here is me at the 35th n Charlotte n turn three this is before I put the cobra r wheels on . I didn't get a chance to look for my Dyno sheet I will do it tomorrow

 

[Bluewater272]

I had a '14 GT that I loved. I'll probably get another once the truck is paid off and can be relegated to boat/yard duty.

 

[Adrian @ JB Solutions]

I had a '14 GT that I loved. I'll probably get another once the truck is paid off and can be relegated to boat/yard duty.

Glad I am not the only one with this plan. Of course I am a Mopar guy so my car would be a Hellcat

 

[112Vulcan]

05 Roush Mustang
425 hp stock for 2005

 

[nate kennedy]

2001 WS6 Trans Am always been a Pontiac fan!

 

[Scott griffith]

Ok was able to get a few pics of mine out of my books from the car shows

 

[Scott griffith]

Here is a pic of mine going on the dyno at the 25th anniversary of the mustang club of America at the atlanta drag strip and the Dyno sheet

 

[Scott griffith]

And here is a pic of the black 96 I had before I got the white one

 

[PEARCE]

No trailer and wouldn't fit in my garage if it did!!

 

[djetok]

Santa showed (literally my ups guy looks like santa) there is more stuff like a racing 170 degree thermostat. He will be back tomorrow. My son and I have an appointment for the dyno tune on Thursday. More stuff to be installed tomorrow. We got the maximum motorsports suspension parts. Have some koni adjustables that will be here tomorrow (bilstien hd' s are still on national backorder) , we will have to trailer to the tune if we can' get the alignment done before.

 

[djetok]

I bought a kwik lift , going to pick it up tomorrow. My son and I decided to autocross the cobra. So more fun under the car. Hence the kwik lift. Which is basically a ramp that you jack up the back. It has 20 inches of clearance and will be great for oil changes of all my vehicles.

 

[Jgorm]

Very cool! I have an 02 gt, kb blower, mm everything (coil over, phb, tq arm, k member, etc). I started tuning mustangs back in 05. Ran a dyno for a few years. I'm still doing remote tuning. Www.tricktuners.com

 

[djetok]

Very cool! I have an 02 gt, kb blower, mm everything (coil over, phb, tq arm, k member, etc). I started tuning mustangs back in 05. Ran a dyno for a few years. I'm still doing remote tuning. Www.tricktuners.com

love it, we did a dyno run the other day. 285 hp / 286 ft/lb tq. We are not going bolt on crazy for HP we are lightening everything we can and still meet SCCA standards.

 

[djetok]

Picked the new lift up in Tulsa, drove back, put it together and got to inspect the cars underside. Since I saw the underbody, which mechanically was very nice. It was dirty as hell, now I get to detail the under carriage lol

 

[Ronnie]

Our current daily drivers, an 03 Chevy and a 2012 Lex Is 350 c both convertibles, my wife hates the Vette (just one of the reasons I’m keeping it. lol ).

 

[djetok]

Our current daily drivers, an 03 Chevy and a 2012 Lex Is 350 c both convertibles, my wife hates the Vette (just one of the reasons I’m keeping it. lol ).

View attachment 71819 View attachment 71820

 

[Ronnie]

I wish but he did ride to work with me this morning. I forgot he was in the car until I pulled up to a stop sign and people started staring and pointing my way.

 

[djetok]

Got the bbk off road x pipe installed , and the magna flow dumps installed. She sounds pissed off!!! I will most likely get a set of mufflers to drive on street. I did drive it home yesterday with the dumps installed. These are a good way to keep people from riding my butt. They stayed back as I cruised home at 60. There is little drone in the cabin as opposed to the outside. My neighbors are not too happy as I'm sure they think another street outlaw is in the neighborhood.

 

[Adrian @ JB Solutions]

What about some electric cut outs?

 

[djetok]

What about some electric cut outs?

that would make it a little louder lol . these are way loud now. Literally, when I pulled into the neighborhood I set off alarms. I did that on the first street then idled in 2nd gear to my house, saying it wasn't me. I left in the am it was a quick shift from 1 to 2nd. They will make a nice track exhaust. The dumps are super easy to change , pull it on the lift, 4 bolts and the hangers and done. I will just get some mufflers and dump them.