What size hose goes to the cooling Pee stream fittings? 10 242 L/S

[zelone]

I remember reading here that someone replaced the plastic fittings with some billet aluminum fittings. I found a bunch of different ones online, but I don't know what size I need. If anyone has replaced them, and has a pic handy, please post is. Thanks!

 

[Speedling]

Watching because I thought about doing the same thing especially when/if I install another bilge.

 

[ISLANDRACING]

The "bypass fittings" are 3/8" The boats use a straight which are pretty rare compared to the 90* or 45* . I replace the ones in my XR with the silver aluminum.
We carry the straight Bypass fittings here:

http://islandracing.net/waterbypassfittings.html

 

[Bill D]

There are a few other options here for bilge outlets.

http://adaracing.com/personal-watercraft-products/fittings/?limit=50

 

[blacksapphirez]

The "bypass fittings" are 3/8" The boats use a straight which are pretty rare compared to the 90* or 45* . I replace the ones in my XR with the silver aluminum.
We carry the straight Bypass fittings here:

http://islandracing.net/waterbypassfittings.html

my boat spits out at 45 degree angle?

 

[RightStuff]

If anyone comes to this looking for the size to order to replace the fitting for the coolant lines, I just did my yesterday and the 1/2 fitting (45 deg.) from ADA racing fits the coolant line ones.

https://adaracing.com/personal-wate...-ski-sea-doo-4-stroke-water-bypass-45-degree/

I did have to Dremel the holes in the hull a tiny bit for the threads to fit, so just a heads up to anyone else swapping them out. It is also much easier as a 2 person job, hard to align the fittings on the outside while tightening them from the inside.