jacoviii
Jetboaters Commander
- Messages
- 622
- Reaction score
- 307
- Points
- 192
- Location
- Independence Mo
- Boat Make
- Yamaha
- Year
- 2022
- Boat Model
- 255XD
- Boat Length
- 25
Not sure. I will look but I have put more info on here then on FB. What are you needing?
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
See pic
Great info! Sorry if I’m Asking a stupid question. To add the line driver to control the new amp and subs (WS stock and new sub) would I just wire it off the rca in the pics for option 3? Those don’t power the sub so would I have to also cut the other rca wires and plug them into the new amp? I really want to learn this stuff but Yamaha went full Bose on the wiring.Ok ez thing to do is the treble mid and bass adj listed above.
Option 2 is add a line driver / bass booster this will help a lot
https://www.sonicelectronix.com/cat_i494_bass-restoration-expanders.html
Option 3 Cut the sub RCAs input wires going to the HTX6 amp they are not used anyways. Put RCAs on the end. Pick a amp that will run both of your subs.
If you add just a new amp and sub and still use the stock sub on the stock amp sub channel they may play at different Frequencies and could cancel each other out a bit
Yeah I downloaded the app and adjusted the settings on the Fusion HU. I keep reading posts about rewiring the port cabin 6.5 speaker to have it run parallel vs. in a series. I am planning on just re pinning the plugs on the amp to allow for each speaker to run on its own channels. Then take your idea and tap an RCA off the HTX-6 that isn’t being used for the sub and run that amp to power my WS sub and maybe another sub on ill add on the drivers cockpit area. Last thing is possibly running a new power cable from the battery of just t tap with a Stinger Distribution block for the 3rd amp and double the fuse amps. Anybody running a capacitor on their boats? A buddy recommended it vs. a distribution block for piece of mind and even out the current draw from the batteries when just floating.No it is on the HTX4 4x100 so 400w @ 4ohm 2 channels are running both of the Icon8" 100x 2ch and 2chs running the sound bar 100x 2ch The sound bar is rated at 75x2 RMS and 150x2 max so it is about right.
Have you adjusted the Zone settings on the Fusion yet. Also down load the Fusion APP to your phone it makes it EZ
Ohhhhh! Wow good call! I still want more bass from the sub. I will just patch in the RCA you talked about and wire that to the WS sub or in parallel with a second sub. Am I on the right track?The parallel vs. in a series issues you read about are the older boats running polk amps
I bought a 2019 242XE in October 2019, I am also not satisfied with system, please keep us updated!I just bought a 2020 242x and I was trying to add a sub and amp because the wet sounds system isn’t sounding great to me. I’ve been trying to scour the forum and got on this thread but I’m not smart enough to figure out what y’all are saying lol. So I’m just trying to figure out the easiest or best way to add more bass. I’ve seen you talk about cutting wires to run the sound bar and sub on its own amp.
Ok thanks and sorry for dragging this out as I try to figure out how to get the most out of the oem WS system. I am going to buy a SoundControl Epicenter DBRP and wire it up.The flash was on early '18 boats that had the L & R wrong on the boat but correct in the tower. I doubt you have that issue. But you can fade side to side and see.