• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

4200 On Underwater LED's

Durkis007

Jet Boat Addict
Messages
48
Reaction score
13
Points
87
Location
Toms River New Jersey
Boat Make
Yamaha
Year
2012
Boat Model
Limited S
Boat Length
24
Hey Guys... I installed my underwater led lights tonight. I know the package says 4200 has a full cure in 24 hours. But say I wanted to dip my boat in after 18 hours, tomorrow night. You think im fine, or should I just wait till Friday??
 
I'm not sure how the heat from the light ,if any, will effect the bond. Food for thought.
 
@Joel Caron I went with Shadow Casters. a 10" for the center, and two 4" on the sides.

Once I have everything hooked up, I will snap some pics and do a little write up.
 
Back
Top