• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

AR220 accessory power source

Midwest doc

Member
Messages
3
Reaction score
0
Points
10
Boat Make
Yamaha
Year
2023
Boat Model
AR
Boat Length
22
I want to add a depth finder that reads over 100' to my AR220. My dealer does not know why the OEM depth finder doesn't read depths over 100'. Anyway, what is the best way to wire a ignition switched power supply for a Humminbird HDR650
finder?
 
Did your boat come with an ACC spare rocker switch?
 
No. Unfortunately no such luck in this 2023 ar220
 
Easiest way - wire a fuse block from the main 'on/off' switch to under the console and then connect your chart plotter to this. I like to leave my chart plotter on even when the ignition is off to watch for anchor drag.

To connect specifically to the ignition, run the same setup but put a relay into it and trigger from the wire directly behind the key switch.


Blue Sea 6-circuit Fuse Block

iRhapsody 12V 30A Relay
 
Back
Top