We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
I am thinking more in the line of tacking a strip of PVC or other water proof material like marine grade plywood to the bottom outside edge of the bunk and apply the LEDs to that..
When I had my old stern drive, one of the first things I did as a newbie was to add on some guide posts. When I bought the Yamaha, I wanted to get on the water so I went without. It wasn't a bad experience, and I never added them on. I boat in a river so I'm ALWAYS fighting a current, wind or not. The trick is, when there's wind or a current, to approach from the downstream/downwind side (I'm guessing at a 30° angle) and curve into the trailer bunks. And don't be afraid to use the throttle... the bunks and the bow stop will catch the boat unless you're coming in REALLY hot. If you try to just putt your way in, the current will screw you all up. I've had some approaches that I thought were questionable, but the throttle straightened things right out.
I have it down now so that I pull away from the dock (which is parallel to the river flow just downstream of the launch) about 50 feet, pivot in place using the superior jet handling our boats have, and pull directly onto the trailer on the first time about 90% of the time. Stern drives are jealous.
I couldn't even imagine how easy it would be to trailer the boat on a lake!
It can definitely get interesting. We have the Kinzua reservoir upstream from us so we get high water conditions at random even when we've not had rain for a while. Very limited boating season here lately, so we go out whenever we possibly can... even if it's high and swift. If we waited for good conditions we'd only get out a few times a year.
My < 10 year plan is to end up on the Gulf coast. It will be nice having the boat on a lift in the backyard, but I don't want to lose the skills of trailering in swift water!
Ok.. I need help finding a switch from some Internet tech say jetboaters... I am going to do the led lights down the trailer like Bruce showed in this thread.. but I want to place a weather proof dimmer switch some where between the power source and the leds lights that will line the trailer... so I can dim them on the road or even turn them off but have them bright while under water... I am having trouble finding the switch that I want.. can anyone help with the search.....
Ok.. I need help finding a switch from some Internet tech say jetboaters... I am going to do the led lights down the trailer like Bruce showed in this thread.. but I want to place a weather proof dimmer switch some where between the power source and the leds lights that will line the trailer... so I can dim them on the road or even turn them off but have them bright while under water... I am having trouble finding the switch that I want.. can anyone help with the search.....
Ok.. I need help finding a switch from some Internet tech say jetboaters... I am going to do the led lights down the trailer like Bruce showed in this thread.. but I want to place a weather proof dimmer switch some where between the power source and the leds lights that will line the trailer... so I can dim them on the road or even turn them off but have them bright while under water... I am having trouble finding the switch that I want.. can anyone help with the search.....
Why has everyone suggested that I unplug my trailer lights before launching or retrieving? Am I missing how these lights get powered? Is this a dumb question?
With older trailers that do not have LEDs, you needed to unplug the lights before dunking them. Often the 'waterproof' fixtures would get some crack or leak and the water contacting the hot bulb would crack the bulb. LEDs don't get hot that way and are less likely to short because of how they are wired.
@njmr2fan, my 2015 trailer doesn't have LEDs either and I leave the lights connected with no issues so far. I guess when I crack the lens, I'll revisit that. My plan is to install the landing lights tapping into the power of the trailer side marker lamps.
All of the LED light controllers that I have seen come with a dimmer on the remote. The two buttons on the top left are the buttons I am talking about.