• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Starboard engine Not Starting when Hot

Messages
3
Reaction score
1
Points
10
Boat Make
Yamaha
Year
2017
Boat Model
AR
Boat Length
21
Hello, my Yamaha AR210 starboard engine starts normally when cold, runs normally. However, if I switch it off, it cannot be restarted immediately. We have to wait 10 to 15 minutes before being able to restart it. Could someone advise me on the probable cause? I’m in Mauritius and there is no Yamaha jet boat dealer. Thank you, Olivier
 
With both engines in neutral, run the no wake mode at level 3, approx 2100 rpm’s for 10-15 seconds, then return no wake to off before shutting down your engines. That should help with re starting when the engines have been in use.
 
With both engines in neutral, run the no wake mode at level 3, approx 2100 rpm’s for 10-15 seconds, then return no wake to off before shutting down your engines. That should help with re starting when the engines have been in use.
Thank you for your help. I’ll try that.
 
Back
Top