• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

hellllp!!!!

Im new steve

Active Member
Messages
6
Reaction score
0
Points
40
Boat Make
Regal
Year
1996
Boat Model
Other
Boat Length
17
hello i have a 94 regal rush with a 90hp sport jet 3 cylinder 2 stroke it just pops and backfires what is the wire colors for the coils 1 green/red-- 2 green /w--- 3 green---??? i do not have a switch box i have a cdi box i just replaced it because i had no spark at all.. i also replaced the trigger all new with # matching parts ...it was a project boat i got cheap and the motor was all apart.. and in the boat like on the floor lol. i put new pistons in it .. #3 was melted bad on top. with broken rings im now at a losssssss.. help
 
I would make sure the timing is correct.
 
Is it a piston port, rotary valve or Reed valve induction? If it’s a Reed valve sounds like a broken reed. If a rotary valve sounds like the rotary valve timing is off.
 
Back
Top