• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Replacement Shorelandr Tandem Fender for 24ft boat

Inthrustwetrust

Jetboaters Lieutenant
Messages
479
Reaction score
736
Points
167
Location
Destin FL
Boat Make
Yamaha
Year
2020
Boat Model
AR
Boat Length
24
Doing some trailer maintenance, new leaf springs, hardware etc, (deff need brakes, maybe bearings and potentially hubs as well, but that’s a later project) and my driver side fender has rusted pretty bad, to a point a hole has developed and I can’t seem to find a replacement. Trailer was built in 2019, tandem axil, galvanized, holds a 24ft boat. Rough measurements are 63L, 8W, 14H. Any help would be appreciated.
 
Doing some trailer maintenance, new leaf springs, hardware etc, (deff need brakes, maybe bearings and potentially hubs as well, but that’s a later project) and my driver side fender has rusted pretty bad, to a point a hole has developed and I can’t seem to find a replacement. Trailer was built in 2019, tandem axil, galvanized, holds a 24ft boat. Rough measurements are 63L, 8W, 14H. Any help would be appreciated.
Go to Trailer Parts Super Store’s website…they have lots of oem fenders.
 
Back
Top