• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

What are these for?

3abadi

Jet Boat Lover
Messages
84
Reaction score
57
Points
67
Boat Make
Yamaha
Year
2022
Boat Model
252S
Boat Length
25
Finally, my 252S was delivered. It will be a busy weekend exploring :winkingthumbsup"

While checking the hull, I noticed these 3 fittings; 2 on the stern and 1 one the starboard. Any idea what are these?
 

Attachments

  • 75855B5D-F7B0-4BD3-A4D6-5CEF926BFC1B.jpeg
    75855B5D-F7B0-4BD3-A4D6-5CEF926BFC1B.jpeg
    1 MB · Views: 65
  • 977D432C-86ED-40D2-9E89-FE36B181D3CC.jpeg
    977D432C-86ED-40D2-9E89-FE36B181D3CC.jpeg
    1.4 MB · Views: 66
  • DCB093CF-1DEE-48B5-A55F-EF8B5255B50D.jpeg
    DCB093CF-1DEE-48B5-A55F-EF8B5255B50D.jpeg
    800.3 KB · Views: 86
Fresh water shower vents and or overflows?
 
Another strange one, why the rubber is extended like this !!
 

Attachments

  • 05BAB355-A97B-4CE4-A0B3-BDAC927457BC.jpeg
    05BAB355-A97B-4CE4-A0B3-BDAC927457BC.jpeg
    2 MB · Views: 87
one of them possibly, but 3 !?
The matching set on the starboard side are to discharge engine coolant, one for each engine. The one on the port side, I believe that's the shower vent.
 
The tiny ones on Stern are cup holder drains. The extended gasket material is left from factory to be cut by dealership during prep. They leave it long because it shrinks over time after a new install. Ours was about 2" long.
 
The tiny ones on Stern are cup holder drains. The extended gasket material is left from factory to be cut by dealership during prep. They leave it long because it shrinks over time after a new install. Ours was about 2" long.
Thanks. That makes sense.
 
Another strange one, why the rubber is extended like this !!
Looks like the factory never trimmed your windshield trim. Cut them off and mail to me. Mine shrunk and now is an inch short
 
Looks like the factory never trimmed your windshield trim. Cut them off and mail to me. Mine shrunk and now is an inch short
Mine were fine the first two seasons, but this spring when I got her ready I noticed both sides have shrunk too. I think the 3yr component warranty might cover it so I'll contact my dealer and see if I can get some replacements or pieces to fill it in.
 
Back
Top