We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Read through all of this. Great info for just about anything you will need.I'm new to boating, how do I do that?
On the upper swim platform section there is a hatch. Unlock the two handles and open the hatch. In the center of your hatch, cleanout tray is a hole housing the cleanout plug. Release and remove the big plug. Once removed you will be able to look down into the jet tunnel forward of the impellor. Inspect the area for any debris and remove any weeds, line, rope, wood chips, toothpicks etc. from the driveshaft and impellor. Once done reseat and lock the cleanout plug. Close and lock the hatch and you should be ready to go.I'm new to boating, how do I do that?