- Messages
- 6,590
- Reaction score
- 3,279
- Points
- 422
- Location
- Lake Ray Roberts, Texas
- Boat Make
- Boatless
- Year
- NA
- Boat Model
- Other
- Boat Length
- NA
here is the mount and install on the 230.
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
-
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
Has anyone added a Garmin Echomap 70S to their 2012 240/242?
- Thread starter txav8r
- Start date
spaz944
Jet Boat Junkie
- Messages
- 130
- Reaction score
- 64
- Points
- 127
- Location
- Cape Coral, Fl
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- SX
- Boat Length
- 21
Mine isnt exactly like this but the cubby area is the same.
spaz944
Jet Boat Junkie
- Messages
- 130
- Reaction score
- 64
- Points
- 127
- Location
- Cape Coral, Fl
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- SX
- Boat Length
- 21
Here is the way I was going to mount it, like b_mutter did for a project he installed. 
spaz944
Jet Boat Junkie
- Messages
- 130
- Reaction score
- 64
- Points
- 127
- Location
- Cape Coral, Fl
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- SX
- Boat Length
- 21
Did you make that bracket for your 230 install?
- Messages
- 6,590
- Reaction score
- 3,279
- Points
- 422
- Location
- Lake Ray Roberts, Texas
- Boat Make
- Boatless
- Year
- NA
- Boat Model
- Other
- Boat Length
- NA
Yes I did. It was aluminum. I epoxied it together and decided that it wouldn't last. So I had it tacked together with an aluminum welder and powdercoated it. I made one without side braces and it had too much bounce in it, so I added braces and it worked perfectly.
Similar threads
