• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

JETBOATPILOT HAS SOMETHING NEW COMING SOON!!!

I am sure It will be worth the wait
 
I cant say that your Yamaha will perform like a dedicated wake boat, but it will surf much better than stock.....and will do something that no other boat on the water will do with the new unexpected product that was discovered during testing.
Hi Will,

Is this new breakthrough just for Yamaha's or will there also be one for a Chaparral?
 
Hi Will,

Is this new breakthrough just for Yamaha's or will there also be one for a Chaparral?

For now it's for Yamaha but it could be done for other makes. We'll have to see if there is sufficient volume there to make it make sense considering the tooling costs are so great.
 
This is killing me hope it will work on a 2007 ar
 
I was hoping Santa was bringing me this unicorn product, however at this point I don’t know if his elves will have this ready!
 
Here is a little teaser video for you to watch.... much more coming soon!!

 
I could be wrong but...
The featured roster tail is not off of that nice 230.. It looks like the 195. So - a diverter, of some kind.
Interesting.

--
 
I could be wrong but...
The featured roster tail is not off of that nice 230.. It looks like the 195. So - a diverter, of some kind.
Interesting.

--
That is a 212X, 2018 model....
 
A diverter capable of shooting the jet under the wave without a wedge. . . . ?
 
That is a 212X, 2018 model....
Darned. How do you get that convergence rooster tail between the two pumps.....?
Interesting. I like the idea of using water to shape the wake. So, applied to the wake to shape it to surf - could be the winner.

--
 
I spy something.....interesting...

Look closely at the the side of the boat. Something is ....attached..goes over the rub rail...and appears to go down into the water...

F77F390A-9494-4422-87F1-1FBD33656453.jpeg 2BF9E7DF-B173-4FD2-BD53-5927407E1005.jpeg
 
Last edited:
Possibly a way to trim out the boat using jet wash...
 
I could be wrong but...
The featured roster tail is not off of that nice 230.. It looks like the 195. So - a diverter, of some kind.
Interesting.

--

That 230 would have a real hard time getting to speed where it sits ;) :D

D320027C-5F04-4BCE-A86F-38A57282802B.jpeg

E91EE92B-D391-42BC-B84D-8AB7A59E009C.jpeg
 
Back
Top