• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Show us what you see!!!

I need to find a way to attach a cup holder to this. I'm thinking industrial velcro and use the original cup holders from my boat

View attachment 181174

Attach a Scotty mount to the board. They can hold many thing. https://www.amazon.com/Scotty-341-BK-Glue-Inflatable-Boats/dp/B004O0BOCA

 
Last edited:
Installed the cabinetry in my wife's new craft room yesterday:

cabinet install.jpeg

First time installing cabinets, but thanks to youtube a pretty straightforward install. Or course, it took me a previous weekend to assemble the cabinets (8 in total, as there is one on the opposing wall).

Next project is to install about 1,000 square feet on vinyl plank flooring on the second floor of the house (the fun floor that includes this craft room). Hope to get this done next weekend.

Jim
 
0B5001CF-0DBB-482C-821F-58F202C5A18C.jpeg
 
Mowing hay…

248AF638-7578-4B8C-97D5-46A053DE0E39.jpeg
 
Mowing hay today, dinner at the boat tonight.
I mentioned in a previous post that we were putting Beneteau identifiers on our boat. I put dark blue seahorses at the bow below the toerail. Well Willow one upped me with her seahorses on the sail cover. Frickin auesome!
While the sail cover was in the shop, she also added navy blue covers over the white zippers on the port side. As I have said before…It’s all in the details. Anyway, here is what I see.

5D5E1222-8307-4DBF-B986-59D10973B2E4.jpeg

06E5D7D5-5576-4A96-8B0F-0B6F7A0192EA.jpeg

She grabbed the graphic online and cut the pieces out by hand in mirror image in vinyl and sewed them to a blue vinyl background and then to the sail cover. No Cricut.


F81799E0-A735-4D1A-B486-1770A4ED4B82.jpeg

The picture above shows the blue zipper covers over the white zippers seen below.

702CA49B-CFDA-4BF0-98CE-2D44B46AF21C.jpeg
 
Last edited:
$300 later and the new shorelander springs came :eek: Only 8 years on this trailer. The tires look surprisingly good for 8 years - no dry rot, but they have high and low spots maybe from the bad springs. Probably I should change them while I'm this far into it. Next month I'm looking to take the boat/trailer 5 hours drive to lake george

IMG_6243.jpg
IMG_6244.jpg
 
@I_squared_r No, I was further east. I looked at one of those inflatable islands at the LI Boat Show but have not pulled the trigger.
 
@zipper we are headed up your way tonight, be in lake george from 30th -6th then hittin your home lake till the 10th, south end I know your north.

We will be in Burlington for the fireworks on the 3rd. Our boat/slip has some of the best real estate to watch them from.
The fireworks barge and the breakwater is where they launch from.

20210703_184258.jpg

You will be a couple hours, by jetboat, South of us. Depending on conditions. Where on the Southern part of the Lake will you guys be?
 
We will be in Roger’s Rock campground till 6 the house in VT just north of Fort Ti. Meeting some friends from Vergennes
 
Hell, Vergennes is close, about an hour South by boat.

20220630_064947.jpg
 
Changing a few knives on the haybine cutter bar. It was missing a strip of grass.

20220630_113346.jpg

And tedding the hay that Mother Nature decided it needed a shower last evening.

IMG_1237_exported_stabilized_2199721194816956328.gif

All good, just an extra step.
 
Last edited:
Back
Top