Ericd
Jet Boat Junkie
- Messages
- 234
- Reaction score
- 305
- Points
- 137
- Location
- Illinois/Florida
- Boat Make
- Yamaha
- Year
- 2021
- Boat Model
- FSH Sport
- Boat Length
- 21
Doesn’t the red hose run to the hose hookups for flushing the engine?
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Which hose to clamp when being towed-2021 AR195
- Thread starter Jamlewis
- Start date
- Tagged users None
RobbieO
Jetboaters Captain
- Messages
- 2,316
- Reaction score
- 1,816
- Points
- 237
- Location
- Sacramento River Delta
- Boat Make
- Yamaha
- Year
- 2021
- Boat Model
- 212SE
- Boat Length
- 21
Yes
drewkaree
Jetboaters Fleet Admiral
- Messages
- 5,784
- Reaction score
- 20,468
- Points
- 707
- Location
- West Allis & Fremont, WI
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- AR
- Boat Length
- 21
billykz
Member
- Messages
- 1
- Reaction score
- 0
- Points
- 10
- Boat Make
- Yamaha
- Year
- 2023
- Boat Model
- AR195
- Boat Length
- 19
just picked up a 2023 AR195s.. and boy, they made this a near impossible task to do. the access hatch is on the opposite side (starboard) of where the hosing is. I wanted to install a valve so i can flush the engine while in the water if i was going to leave the boat overnight. i'll have to either brake the silicone holding down that entire cover or cut out a section on the port side to install another pop hatch. why make it so difficult to access an area you need to get to during an emergency?
drewkaree
Jetboaters Fleet Admiral
- Messages
- 5,784
- Reaction score
- 20,468
- Points
- 707
- Location
- West Allis & Fremont, WI
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- AR
- Boat Length
- 21
Because it's Yamaha, and there's no emergency when assembling the boat
If you don't already have one, a hose removal tool will also be helpful, as there SHOULD be silicone around the cleanout tube on the underside of the tray on the fitting, and that will help you with breaking that initial seal. Don't forget to re-silicone that tube when you reinstall the tray, as water in the tubes can leak down in that area as well. Here's the tool I'm talking about, and it's called a hose removal tool, often used for radiator hoses and the like.
