• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Lectrotab Offering for Yamaha Boats

Bruce

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
13,326
Reaction score
13,421
Points
857
Location
Royal, AR
Boat Make
Yamaha
Year
2007
Boat Model
SX
Boat Length
23
Has anyone tried one of these kits with the self leveling controller?

http://www.lectrotab.com/products/automatic-level-control.php
I have the Mente Marine Attitude Control System (ACS) which I believe to be the same product as the Lectrotab ALC.



It works great. I can level out the boat how I want it and save that attitude. When I start up again the controller will automatically correct the boat to that attitude and keep it there.

An Australian member on YJB had an earlier version of the Mente Marine ACS on his 240 and said she handled 3' seas well.

 

davel501

Jetboaters Commander
Messages
838
Reaction score
338
Points
192
Location
Antioch, Illinois
Boat Make
Yamaha
Year
2010
Boat Model
Limited S
Boat Length
24
Yeah, those Volvo tabs look like they might be the better way to go if I want to be able to use the Wake Wedge too. It looks like the actuators would be in the way with the traditional system.
 

Bruce

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
13,326
Reaction score
13,421
Points
857
Location
Royal, AR
Boat Make
Yamaha
Year
2007
Boat Model
SX
Boat Length
23
I had a set of Volvo Interceptors. My understanding was that the Interceptors were not compatible with the new Mente Marine ACS. So I decided to go with Lectrotab.

But you are correct that I do not see any way to install both the trim tabs and the Wake Wedge.
 

2nazt

Jetboaters Captain
Messages
1,589
Reaction score
1,361
Points
217
Location
Port St. Lucie, FL
Boat Make
Tidewater
Year
2010
Boat Model
Other
Boat Length
23
I talked to Lectrotab as I will be ordering in about a month and their prices for the second kit is still the same with the auto retract feature. They have all info still on file and will ship in 24hours of order. They were very friendly and easy to talk to.

Just wanted to share as the original post is 2 years old with prices.
 

Bruce

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
13,326
Reaction score
13,421
Points
857
Location
Royal, AR
Boat Make
Yamaha
Year
2007
Boat Model
SX
Boat Length
23
I talked to Lectrotab as I will be ordering in about a month and their prices for the second kit is still the same with the auto retract feature. They have all info still on file and will ship in 24hours of order. They were very friendly and easy to talk to.

Just wanted to share as the original post is 2 years old with prices.
Thanks, did you ask about the Manual Leveling LED Control?



If the price is reasonable it would be my choice.
 

2nazt

Jetboaters Captain
Messages
1,589
Reaction score
1,361
Points
217
Location
Port St. Lucie, FL
Boat Make
Tidewater
Year
2010
Boat Model
Other
Boat Length
23
No I think the oval unit it comes with is okay. It won't adjust both tabs with one button but does the auto retract at shut off and and LED indicate position. I think the one show also returns to last setting. I don't know the upgrade cost. Do you think there is a big benifit from the oval unit in the higher kit to the manual besides one button operation?
 

Bruce

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
13,326
Reaction score
13,421
Points
857
Location
Royal, AR
Boat Make
Yamaha
Year
2007
Boat Model
SX
Boat Length
23
No I think the oval unit it comes with is okay. It won't adjust both tabs with one button but does the auto retract at shut off and and LED indicate position. I think the one show also returns to last setting. I don't know the upgrade cost. Do you think there is a big benifit from the oval unit in the higher kit to the manual besides one button operation?
I think it is worth asking what the price difference is. If they are the same or similar I would prefer the newer control. I have not been able to find a price anywhere.
 

2nazt

Jetboaters Captain
Messages
1,589
Reaction score
1,361
Points
217
Location
Port St. Lucie, FL
Boat Make
Tidewater
Year
2010
Boat Model
Other
Boat Length
23
When I call to place order I will ask. I think the new style looks better also. If it it similar I would probably order just for the cosmetics alone. I'm debating to order a switch panel first though as I don't want to keep adding rockers and rewire with switch panel. I have one rocker behind helm for aft bilge I added. I may order a 6 switch panel as I will fill it up shortly.
 

Scuba_ref

Jetboaters Admiral
Messages
1,556
Reaction score
2,450
Points
287
Location
Wenatchee, WA
Boat Make
Yamaha
Year
2018
Boat Model
AR
Boat Length
24
I wanted a greater surface area on the tabs in hopes that it will help with wake surfing as well. Hopefully we will get to test that theory this weekend.

.
@Bruce what was your final verdict on this aspect of your tab install?
 

Bruce

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
13,326
Reaction score
13,421
Points
857
Location
Royal, AR
Boat Make
Yamaha
Year
2007
Boat Model
SX
Boat Length
23
@Bruce what was your final verdict on this aspect of your tab install?
A friend who was surfing ropeless behind his SX230 added I believe 500 pounds of ballast to my boat and played with the tabs to see what they could do for the wake. He was not impressed so we decided they were not helpful.

If I wanted trim tabs for surfing I think I would ask Lectrotab to build a pair that was long and thin and were hinged at a 45 degree angle to mount at the outside edges of the boat. They would fold up under the swim deck when not in use and extend out and down similar to the suction cup devices and likely for a similar cost.
 

swatski

Jetboaters Fleet Admiral 1*
Messages
12,806
Reaction score
18,566
Points
822
Location
North Caldwell, NJ
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24
Bruce,

Thank you for all of your help and the great report you have provided about the products we offer. If anyone has any further questions please feel free to contact us anytime.

Below you will find two custom trim tab kits and pricing that have been setup for the Jetboaters.net community and can only be purchased at this price factory direct. Call today with the kit number shown and it will be shipped same day if the order is placed before noon Eastern Standard Time.

CXKAF12X12-9051 - $509.00 plus shipping

Individual parts included in kit:
  • T12X12-9051 – SS tabs with taper bent down edges / pair
  • A-BK-13 – 12vdc actuator with 23’ cable /pair
  • SAF-SC - Rocker Switch

CXKASB12X12-9051 - $678.00 plus shipping

Individual parts included in kit:
  • T12X12-9051 – SS tabs with taper bent down edges / pair
  • A-BK-13 – 12vdc actuator with 23’ cable /pair
  • SETR-61 - Oval Control, potted sealed, waterproof, LEDS, and Auto-tab Retraction Feature

Thank you and please contact us anytime.

Regards,
Lectrotab Team

URL: http://www.lectrotab.com
Phone: 888 532 8768
Email: sales@lectrotab.com
@Lectrotab Trim Tabs I am interested in installing a tab kit in a 2016 AR240 and have a couple of questions.

First, does your Jetboaters.net offer above still stand as indicated by another member here (@2nazt)?
I talked to Lectrotab as I will be ordering in about a month and their prices for the second kit is still the same with the auto retract feature. They have all info still on file and will ship in 24hours of order. They were very friendly and easy to talk to.
Just wanted to share as the original post is 2 years old with prices.
Second, would it be possible to swap the actuator for the "short" model in the CXKASB12X12-9051 kit?

Third, would it be possible to move the blade attachment sites (holes/cutouts in the blades) backwards (towards the hinge/transom) by approx 1" to 1 1/2"?

As you know, @Bruce has enjoyed your your tabs for several seasons now, and we know that he drives his boat hard! I am convinced those are the best offerings on the market for our boats, especially if the above modifications could be accommodated. Yamaha jet boats present a particular challenge with their transom design. In the new hulls, such as the 2016 240, the installation would follow (in general) this example (by @paul075):




Thank you for any advice you can offer!


--
 
Last edited:

blacksapphirez

Jetboaters Captain
Messages
1,169
Reaction score
938
Points
237
Location
Charleston, SC
Boat Make
Yamaha
Year
2020
Boat Model
SX195
Boat Length
19
Any possible group buys?
 

Mike Serra

Jet Boat Lover
Messages
29
Reaction score
28
Points
82
Location
Mobile AL, 36695
Boat Make
Yamaha
Year
2017
Boat Model
242 Limited S E-Series
Boat Length
24
@Lectrotab Trim Tabs I am interested in installing a tab kit in a 2016 AR240 and have a couple of questions.

First, does your Jetboaters.net offer above still stand as indicated by another member here (@2nazt)?


Second, would it be possible to swap the actuator for the "short" model in the CXKASB12X12-9051 kit?

Third, would it be possible to move the blade attachment sites (holes/cutouts in the blades) backwards (towards the hinge/transom) by approx 1" to 1 1/2"?

As you know, @Bruce has enjoyed your your tabs for several seasons now, and we know that he drives his boat hard! I am convinced those are the best offerings on the market for our boats, especially if the above modifications could be accommodated. Yamaha jet boats present a particular challenge with their transom design. In the new hulls, such as the 2016 240, the installation would follow (in general) this example (by @paul075):




Thank you for any advice you can offer!


--
@swatski Have you heard anything back from @Lectrotab Trim Tabs yet? I have the same hull style and would need a similar solution. I will primarily be boating in the Gulf of Mexico and the trim tabs are a must.
 

swatski

Jetboaters Fleet Admiral 1*
Messages
12,806
Reaction score
18,566
Points
822
Location
North Caldwell, NJ
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24
@swatski Have you heard anything back from @Lectrotab Trim Tabs yet? I have the same hull style and would need a similar solution. I will primarily be boating in the Gulf of Mexico and the trim tabs are a must.
Mine are DONE. Best mod ever, hands down. I use the tabs all the time, every time we go out.
My install is also compatible with wake surfing, which is tricky.
https://jetboaters.net/threads/trim-tabs-options-wake-surfing-and-cruising.12031/page-4

--
 

EZ311

Active Member
Messages
6
Reaction score
0
Points
30
Boat Make
Chaparral
Year
2018
Boat Model
VRX
Boat Length
24
Bruce,

Thank you for all of your help and the great report you have provided about the products we offer. If anyone has any further questions please feel free to contact us anytime.

Below you will find two custom trim tab kits and pricing that have been setup for the Jetboaters.net community and can only be purchased at this price factory direct. Call today with the kit number shown and it will be shipped same day if the order is placed before noon Eastern Standard Time.

CXKAF12X12-9051 - $509.00 plus shipping

Individual parts included in kit:
  • T12X12-9051 – SS tabs with taper bent down edges / pair
  • A-BK-13 – 12vdc actuator with 23’ cable /pair
  • SAF-SC - Rocker Switch

CXKASB12X12-9051 - $678.00 plus shipping

Individual parts included in kit:
  • T12X12-9051 – SS tabs with taper bent down edges / pair
  • A-BK-13 – 12vdc actuator with 23’ cable /pair
  • SETR-61 - Oval Control, potted sealed, waterproof, LEDS, and Auto-tab Retraction Feature

Thank you and please contact us anytime.

Regards,
Lectrotab Team

URL: http://www.lectrotab.com
Phone: 888 532 8768
Email: sales@lectrotab.com
will these work on the Chaparral Vortex 243?
 
Top