• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Replacement rod holders

BinbrookJake

BinbrookJake

Well-Known Member
Messages
13
Reaction score
4
Points
62
Boat Make
Yamaha
Year
2017
Boat Model
FSH
Boat Length
19
The rubber caps that seal my rod holders have all rotted. I was hoping to just replace the caps but it appears they're a part of the whole unit (F3M-U2898-00-00). I saw Kahuna Khris's post about upgrading the rod holders entirely, which I could still do, but has anyone replaced just the caps?
 
BinbrookJake said:
The rubber caps that seal my rod holders have all rotted. I was hoping to just replace the caps but it appears they're a part of the whole unit (F3M-U2898-00-00). I saw Kahuna Khris's post about upgrading the rod holders entirely, which I could still do, but has anyone replaced just the caps?
Click to expand...

If you are talking about caps on the top of the rod holders I don’t have a suggestion. If you are talking about the caps on the bottom T-H Marine has universal ones that slip on the bottom with a 3/8” drain hose on them. The only rod holders on my boat that had drains from the factory were the forward ones, the rest drained into the storage compartments, I got the T-H marine ones mentioned above and then routed the drains so they all dump overboard.
 
You must log in or register to reply here.

Similar threads

I
Rear cup holder drains on 2023 252S
Replies
0
Views
459
ibwilder
I
MTC Screens
Anyone with a 2024 model and can take a photo of the back of the connext screen label?
    • Like
Replies
2
Views
280
Bradherr
Bradherr
A
Any help with a Display Screen?
Replies
11
Views
2K
jack28
J
FSH 210 Sport
Adding Rod holders and rod holder drains.
    • Like
Replies
7
Views
3K
FSH 210 Sport
FSH 210 Sport
Adrian @ JB Solutions
FSH195 Livewell Pump Model #
Replies
2
Views
447
FSH 210 Sport
FSH 210 Sport
Back
Top