jfkraus
Jetboaters Lieutenant
- Messages
- 168
- Reaction score
- 157
- Points
- 167
- Location
- Renton, WA
- Boat Make
- Yamaha
- Year
- 2010
- Boat Model
- Limited S
- Boat Length
- 24
Is it possible to upgrade older boats like a 2010 242 LS to electronic fly-by-wire controls?
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Fly By Wire
- Thread starter jfkraus
- Start date
- Messages
- 18,681
- Reaction score
- 21,102
- Points
- 1,102
- Location
- Raleigh, NC 27614
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- 242X E-Series
- Boat Length
- 24
I've not seen a kit to do this....but you'd need:
1) Motors to move the gates
2) New binnacle to connect to controller
3) controller between the two (not sure if Yamaha built this into their Connext screen 100%, but it does link to it to allow you to use just one binnacle to control both engines and gates)
So this wouldn't be cheap with Yamaha parts!
1) Motors to move the gates
2) New binnacle to connect to controller
3) controller between the two (not sure if Yamaha built this into their Connext screen 100%, but it does link to it to allow you to use just one binnacle to control both engines and gates)
So this wouldn't be cheap with Yamaha parts!
