Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Someone had patched the floorpans at some point, and didn't quite get the seat tracks perfectly square. So, I'm replacing both full pans. And doing a full airride setup. And swapping 4 wheel drum brakes to 4 wheel disc. And powdercoating a bunch of stuff to make pretty. And probably more.
No hole. Just had an idea one day and an old camping mess kit happed to be nearby. I grabbed the small tin cup out of it and the jet jetboil burned right through it. So from there I grabbed the plate and cap when ch I happened to have hanging around at it worked out so I stuck with that ever since. Controlling the heat is real tough so an electric hot plate with fine control that gets hot enough would be great. Switching over to a cleaned and cutoff bean can could work too I just don't want to burn through again.
I saw this on Christmas Eve. 1999 Seadoo XP with 951 cc 135 hp motor, rebuilt carbs, new battery, cover and trailer. Actually I went with cash in hand and did the compression check described. It was supposed to be an impromptu Christmas gift to myself (I don't always trust Santa because I'm naughty sometimes). Passed because of the bad compression on the first cylinder but may make him an offer if he doesn't sell it after this week. It's been a few years since I've had to rebuild a two stoke engine/experienced the occasional pain of owning a Seadoo and I'm not sure that I want to again but this is a sweet pwc, when it's running. FYI Craig's list ads usually expire after 7 days.
My parents' present to me was a huge canvas picture of our boat. My son insisted on being in the picture, which is normal since he never leaves my side.
Taking a charter bus to squaw valley to do some snowboarding with my son. Got up at 4:15 to meet the bus. This is what I see right now and will for the next 3 to 4 hours.
I saw this on Christmas Eve. 1999 Seadoo XP with 951 cc 135 hp motor, rebuilt carbs, new battery, cover and trailer. Actually I went with cash in hand and did the compression check described. It was supposed to be an impromptu Christmas gift to myself (I don't always trust Santa because I'm naughty sometimes). Passed because of the bad compression on the first cylinder but may make him an offer if he doesn't sell it after this week. It's been a few years since I've had to rebuild a two stoke engine/experienced the occasional pain of owning a Seadoo and I'm not sure that I want to again but this is a sweet pwc, when it's running. FYI Craig's list ads usually expire after 7 days.