• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

Tying off in a slip

penziol

Jet Boat Lover
Messages
42
Reaction score
31
Points
67
Boat Make
Yamaha
Year
2012
Boat Model
Limited S
Boat Length
24
Hey all, new boater here and wondering how everyone ties off their boats in a slip. I will have a slip this year with a dock on one side and a pole in between our boat and a neighbor boat. Do you do something like the below image all the time when you go home of something different. Thanks for the input.

92073
 

Attachments

  • 1555595298183.png
    1555595298183.png
    233 KB · Views: 1
Man. I only do bow and aft in the direction of the spring lines in your diagram but tie them to the cleats in the middle of the dock in that diagram. But then again I'm a super noob. Only had the boat for a few weeks. Also, I only dock for a bit until the guys from the dry stack come and tow the boat out to be stacked. At most it stays overnight.
 
Hey all, new boater here and wondering how everyone ties off their boats in a slip. I will have a slip this year with a dock on one side and a pole in between our boat and a neighbor boat. Do you do something like the below image all the time when you go home of something different. Thanks for the input.
Assuming it's a salt water slip:
Floating docks are easy; one on the bow cleat, one on the back with fenders in between just to keep to boat slightly off the dock.
Stationary docks are a little more challenging due to tide levels and boat traffic. Spring lines are necessary and will adjust accordingly to the height of the water. Spring lines are great to help position the boat making sure it cannot move forward or backwards. If allowed, you'll want to use the pole to help keep the boat off the slip but again still use fenders as an added measure to protect the sides of the boat. Hope this helps.
 
You want to be aware and mindful of the range of the tide. If it drops 3 ft and goes under the dock, then back up...bad news. Pole helps with that, or a line from your opposite mid cleat to that pole in the middle... some things to consider.
 
Don't end up like this :p

94C352B0-ED4C-444D-A906-04777CBFD317.jpeg

31BC7062-9399-43E6-9D6D-92EA13461959.jpeg
 
1555595302298.jpgMy Photoshop skills need work, but I do something like this. One line in a "V" with snubbers to a hook that goes to the bow eye. Another line to a stern cleat with a snubber on the dock side, and a spring line to the mid-ship cleat to pull the bow away from the dock. I have dock edging and 4 big fenders mounted horizontally to the dock on the starboard side. Keep in mind I'm in relatively calm water...floating dock.
 
I do similar to @Billtex2000 but I cross the bow lines.
 
Back
Top