• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

2019 210 FSH Sport exhaust seal ring

Flyr54

Active Member
Messages
4
Reaction score
0
Points
40
Boat Make
Yamaha
Year
2019
Boat Model
FSH Sport
Boat Length
21
I have always heard about the after birth in yamahas and I saw some when I first bought the boat in 2019 but I pulled her out of the water after a weekend of fun today and found this coming out of the starboard exhaust port. My question is this still part of the after birthing process after 1 years and about 80 hrs or it is something i need to look into replace?
Side note I did notice the bilge turning on more than usual this weekend.
 

Attachments

Julian

Jetboaters Fleet Admiral 2*
Staff member
Administrator
Messages
18,371
Reaction score
20,460
Points
1,082
Location
Raleigh, NC 27614
Boat Make
Yamaha
Year
2016
Boat Model
242X E-Series
Boat Length
24
I have always heard about the after birth in yamahas and I saw some when I first bought the boat in 2019 but I pulled her out of the water after a weekend of fun today and found this coming out of the starboard exhaust port. My question is this still part of the after birthing process after 1 years and about 80 hrs or it is something i need to look into replace?
Side note I did notice the bilge turning on more than usual this weekend.
Totally normal afterbirth.

Bilge pump running is from some other source - investigate that - look in the FAQ for the Ultimate Leak Finder thread (or do a search for that).....post in reply to that if you find a leak we don't have covered.
 
Top