• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Adding extra switches to dash

Bruce

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
13,331
Reaction score
13,426
Points
857
Location
Royal, AR
Boat Make
Yamaha
Year
2007
Boat Model
SX
Boat Length
23
I want to add extra switches to my dash. At minimum I want to add one for underwater LEDs and a second to override a low voltage disconnect.

The best idea that I have so far is to rework the panel on the right side of the steering wheel.

The warning sticker area to the right of the dash is a candidate location for a switch panel. But I need to install trim tab controls either in that area or where the depth gauge is. I am adding a Ray Marine Dragonfly chart plotter above the dash near the A-Pillar to replace the depth gauge.

I am wondering who may have other options to share.

Thanks.

This is an old picture of the dash.

20130528_113139[1].jpg
 

pagekl

Jet Boat Addict
Messages
191
Reaction score
66
Points
107
Location
Hanahan, SC
Boat Make
Yamaha
Year
2010
Boat Model
Limited S
Boat Length
24
Talking about the dash. For you 240 series boat owners, there is a safety recall on our dash boards. Mine is at the dealer getting replaced this week.
 

RightStuff

Jetboaters Admiral
Messages
1,045
Reaction score
1,022
Points
282
Location
Twin Cities, Minnesota
Boat Make
Moomba
Year
2023
Boat Model
Other
Boat Length
23
How clear and accessible is the spot below the light and above the throttles? That looks like a good spot too...
 

KXCam22

Jetboaters Admiral
Messages
1,084
Reaction score
907
Points
257
Location
Kamloops BC
Boat Make
Yamaha
Year
2008
Boat Model
AR
Boat Length
23
Rightstuff. That spot is clear and open in the back. I mounted a touchscreen for my ballast there. Cam.
 

Julian

Jetboaters Fleet Admiral 2*
Staff member
Administrator
Messages
18,368
Reaction score
20,455
Points
1,082
Location
Raleigh, NC 27614
Boat Make
Yamaha
Year
2016
Boat Model
242X E-Series
Boat Length
24

Skysurfer2010

Jet Boat Junkie
Messages
429
Reaction score
161
Points
142
Location
Philly
Boat Make
Yamaha
Year
2020
Boat Model
242 Limited S E-Series
Boat Length
24
I had a custom switch panel made. I have a thread on the other site about it. The guy does great work and can make anything you want including backlit logos.

image.jpg image.jpg
 

Attachments

Bruce

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
13,331
Reaction score
13,426
Points
857
Location
Royal, AR
Boat Make
Yamaha
Year
2007
Boat Model
SX
Boat Length
23

Boat Crazy

Jetboaters Admiral
Messages
1,218
Reaction score
903
Points
257
Location
Lebanon Missouri
Boat Make
Yamaha
Year
2010
Boat Model
AR
Boat Length
24
Talking about the dash. For you 240 series boat owners, there is a safety recall on our dash boards. Mine is at the dealer getting replaced this week.
@pagekl I suggest you start a new topic on this so this topic does not get hi-jacked.
 

MikeyL

Passed Away
In Memoriam-RIP
Messages
2,729
Reaction score
1,358
Points
222
Location
Lake Oconee, GA (Greensboro)
Boat Make
Yamaha
Year
2016
Boat Model
242 Limited S E-Series
Boat Length
24
This thread PROVES what an incredibly GREAT website jetboaters.net is.
WOW. Makes me feel so very grateful to be able to be a member here.
And by the way .... Thanks guys for this thread. It is something I myself have wondered about ...... and now I know what I can do.
Many Blessed Wishes your way ...... Mikey Lulejian - Lake Oconee, GA
 

Glassman

Jetboaters Admiral
Messages
2,238
Reaction score
1,943
Points
267
Location
Redondo Beach, California, U.S.A.
Boat Make
Yamaha
Year
2004
Boat Model
AR
Boat Length
23
I picked up a 4 switch Hella panel from West Marine:
helm%20clsup.jpg

I need to swap it out with a bigger panel.....
 

tshera

Jet Boat Lover
Messages
5
Reaction score
0
Points
70
Location
Indian Lake, Ohio
Boat Make
Yamaha
Year
2009
Boat Model
Limited
Boat Length
23
@Skysurfer2010, thank you for this post ... I will be hitting up your contact for a switch panel. I am also wondering, did you add the little phone cubby in front of the throttles? If yes, any chance you remember where you sourced it? I would love to add that to my 232.

Thanks again,

~Tim
 

tshera

Jet Boat Lover
Messages
5
Reaction score
0
Points
70
Location
Indian Lake, Ohio
Boat Make
Yamaha
Year
2009
Boat Model
Limited
Boat Length
23
Ok. Thanks. I'm going to see if I can order it for my 09 232.

~Tim
 

Bruce

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
13,331
Reaction score
13,426
Points
857
Location
Royal, AR
Boat Make
Yamaha
Year
2007
Boat Model
SX
Boat Length
23
Ok. Thanks. I'm going to see if I can order it for my 09 232.

~Tim
Some owners have installed a small stainless bread pan to make a storage area there.
 

Skysurfer2010

Jet Boat Junkie
Messages
429
Reaction score
161
Points
142
Location
Philly
Boat Make
Yamaha
Year
2020
Boat Model
242 Limited S E-Series
Boat Length
24
If you have a local West Marine they sell a few options as well. I'm sure you could find something local that would work.
 

txav8r

Jetboaters Admiral
Staff member
Administrator
Messages
6,590
Reaction score
3,275
Points
422
Location
Lake Ray Roberts, Texas
Boat Make
Boatless
Year
NA
Boat Model
Other
Boat Length
NA
I bought a Blue Sea switch/fuse panel that I liked. It isn't the carbon look of @Skysurfer2010 and his does look good. But in my '08 230, the panel I found looked more stock than something like that. I need to add a switch panel to the '12 240 and I like the looks of that panel Greg put in. And it has circuit breakers vs fuses, even better i think. The only question is changing breakers for different loads. I will want to keep to the 80% rule. Here is the panel I put in the '08, but I think I changed the face plate back to the charcoal color, can't remember now, @DawgDaze , what say you?
DSCN0900 (Medium).JPG
 

DawgDaze

Jet Boat Junkie
Messages
192
Reaction score
74
Points
127
Location
Lake Elsinore, California
Boat Make
Yamaha
Year
2008
Boat Model
SX
Boat Length
23
It IS a charcoal color@ txav8r...sorry for the delay. I need to bring the dawg home again soon to charge the batteries and air her out. So what is the plan for the LED's??
 

txav8r

Jetboaters Admiral
Staff member
Administrator
Messages
6,590
Reaction score
3,275
Points
422
Location
Lake Ray Roberts, Texas
Boat Make
Boatless
Year
NA
Boat Model
Other
Boat Length
NA
I don't have a plan yet @DawgDaze . A little mood lighting and ability to see when eating dinner or moving around the boat is what I want. The cool factor isn't as important as utility and ambiance. If I could get the lights totally indirect I would, but nothing is perfect. How y'all hangin'?
 
Top